+86 183 3210 8399nt@nataichem.com

Quick links

Locaiton : Home - News

Potassium Monopersulfate Chlorine-Free Pool Shock

50% Potassium Monopersulfate Chlorine-Free Pool Shock 1kg Bags 5kg bucket

Item Number: Natai008

Our non-chlorine oxidizing shock treatment for swimming pool and spa water replaces superchlorination & destroys irriating and odorous chloramines. Contains no calcium or chlorine and is completely soluble. Improves water quality, and won't bleach vinyl! Replaces super chlorination and destroys irritating & odorous chloramines. Won't bleach vinyl, improves your water quality and allows you to swim sooner.

Chlorine-Free shock is an oxider that burns off dead chlorine cells

Improves water quality and will not bleach vinyl liners

Great for weekly maintenance

Works great with bromine sanitized pools

50% Potassium Monopersulfate made by Hebei Natai Chemical Industry

Directions For Use: Read entire description and use in accordance with precautionary statements and directions. Regular use of this product will oxidize most of the organic contaminates that result from bather load, skin, mucous, urine, cosmetics, leaves and wind blown matter. These contaminates react with Free Chlorine and form Combined Chlorine, which is a form of chlorine that is ineffective as a pool water sanitizer. This product will also react with any non-living contaminates which exert a chlorine or bromine demand and regular use will ensure that the sanitizer used to disinfect the pool water will remain in the pool in its "free" and "active" form. This product is not a sanitizer or an algaecide. For routine disinfection, use an EPA Registered Product according to label directions.

How To Use: 

For the initial treatment, add this product at the rate of 1G per 35L of water, in order to ensure breakthrough oxidation.

Subsequent treatment for normal bather load should be made once a week at a rate of 0.5 g per 35L of water.

For heavily contaminated pools, more frequent treatment may be required.

How To Apply: Broadcast the required amount of this product uniformly over the surface of the pool water, adding two-thirds of the total dose over the deep end of the pool. Run the circulation system for at least 12 hours to ensure proper distribution. For best results, apply this product when no swimmers are in the pool, preferably at night.

For SPAs: Apply 1g of this product (3 tablespoons) per 33L of water weekly. Add more often if bathing load is heavy. Sprinkle the product over the spa water surface while the circulation pump is in use. This product works best when added to the spa after bathing. 

Potassium monopersulfate, OXONE,CAROAT, Potassium peroxymonosulfate,삼종염,옥손, monopersulfao potasio,