+86 183 3210 8399nt@nataichem.com

Quick links

Locaiton : Home - News

Potassium Monopersulfate CompoundChemical Safety Data Sheet

Chemical Safety Data Sheet

Section 1 Product and Company Identification

Product Name

Potassium Monopersulfate Compound

Manufacture Name

Hebei Natai Chemical Industry Co., Ltd

Manufacture Add

No.6 Chemical North Road, Circular Chemical Industrial District, China

Manufacture Fax

+86 311 67093060

Manufacture Email

natai@hbnatai.com

Emergency Number

+86 311-882978611

Effective Date

Oct 10, 2016

Section 2 Hazards Identification

Hazard class and label elements of the substance according to GHS(the fifth revised edition):

GHS hazard class

Physical hazard(s)

Acute toxicity-oral

Category5

Health hazard(s)

Skin corrosion/irritation

category1b

Serious eye damage/eye irritation

category1

Specific target organ toxicity, single exposure;

Respiratory tract irritation

category3

Pictogram

Hazard statement(s)

Danger

H303 May be harmful if swallowed

H314 Causes severe skin burns and eye damage

H318 Causes serious eye damage

H335 May cause respiratory irritation

Precautionary statements Prevention

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P264 Wash hands thoroughly after handling.

P271 Use only outdoors or in a well-ventilated area.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Response

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER/doctor.

P312 Call a POISON CENTER/doctor/if you feel unwell. P363 Wash contaminated clothing before reuse.

Storage

P403+P233 Store in a well-ventilated place. Keep container tightly closed.

P405 Store locked up.

Disposal

P501 Dispose of contents/container in accordance with local/ regional/national/international regulations.

Section 3 Composition/Information on Ingredients

Component

Concentration(% W/W)

CAS No.

EC No.

Potassium Monopersulfate Compound

99%

70693-62-8

274-778-7

Magnesium oxide

1%

1309-48-4

215-171-9

Section 4 First Aid Measures

After skin contact

Immediate flush skin with plenty of water. Remove and isolate contaminated clothing and shoes. If irritation persist, get medical attention immediately. for minor skin contact, avoid spreading material on unaffected skin. Wash clothing separately before reuse.

After eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. Get medical advice.

After ingestion

If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Loosen tight clothing such as a collar, tie, belt or waistband the substance. Seek immediate medical attention. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

After inhalation

Move to fresh air. Oxygen or artificial respiration if needed, Get immediately medical attention.

Section 5 Fire Fighting Measures

Hazardous products of combustion

Can be released in case of fire: oxygen, sulfur dioxide, sulfur anhydride, etc.

Extinguishing method

Chemical,chemical foam,or alchol-resistant foam.

Special protective equipment

Wear full protective clothing, including helmet, self- contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask.

Section 6 Accidental Release Measure

Personal protective measures

Ensure adequate ventilation. Remove all sources of ignition. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering. Keep unnecessary personnel away.

Environmental protective measures

Prevent further leakage or spillage if safe to do so. Do not allow material to be released to the environment without proper governmental permits.

Methods for taking in and cleaning up

Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation. Clean contaminated surface thoroughly.

Section 7 Handling and Storage

Handling

Avoid contact with skin, eyes, mucous membranes and clothing. In case of insufficient ventilation, wear Suitable respiratory equipment if ingested. Avoid formation of dust and aerosols. Keep away from heat, sources of ignition, sparks or open flame.

Storage

Keep in a cool, dry, well-ventilated place. Keep tightly closed until used. Keep away from fire and heat source. Sealed packaging. Store away from reducing agents, strong bases, heavy metallic salt, etc.

Section 8 Exposure Controls/Personal Protection

Engineering Controls

Facilities storing or utilizing this material should be equipped with an eyewash and a safety shower facility. Use adequate ventilation to keep airborne concentrations low.

Respiratory protection

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.

Eye protection

Use safety glasses with side shields or safety goggles as mechanical barrier for prolonged exposure.

Hand Protection

Wear appropriate chem1ical resistant gloves.

Body protection

Use clean protective body-covering as needed to minimize contact with clothing and skin.

Section 9 Physical and Chemical Properties

Appearance

White solid

Odour

No data available

Odour Threshold

No data available

pH

at 20℃ 1% solution 2.0-2.3

Melting point/freezing point

No data available

Initial boiling point and boiling range

No data available

Flash point

No data available

Evaporation rate

No data available

Flammability (solid, gas)

No data available

Upper/lower flammability or explosive limits

No data available

Vapour pressure

No data available

Vapour density

No data available

Relative density(g/L)

900~1300

Water solubility(g/L,20℃)

256

Partition coefficient: noctanol/water

No data available

Autoignition temperature

No data available

Decomposition temperature

90℃

Viscosity

No data available

Section 10 Stability and Reactivity

Reactive

No data available.

Chemical stability

This is a stable chemical under the recommended storage condition.

Possibility of hazardous reactions

No data available.

Avoid conditions

Heat, flames and sparks. Incompatibles. The extreme temperatures and direct sunlight.

Incompatible materials

Reducing agents, strong bases, heavy metallic salt.

Hazardous decomposition products

Oxygen, sulfur dioxide, sulfur anhydride.

Section 11 Toxicological Information

Acute toxicity: Potassium bisulfate:

LD50(rat,Oral)2340mg/Kg.

Potassium sulfate:

LD50(rat,Oral)6600mg/Kg.

Skin corrosion/irritation:

Cause serious skin burns and eye damage.

Serious eye damage/eye irritation:

Cause serious eye damage.

Respiratory or skin sensitization:

No data available.

Germ cell mutagenicity:

No data available.

Carcinogenicity:

1% of the components are identified by IARC as a possible or affirmative human carcinogen。

Reproductive toxicity:

No data available.

Specific target organ toxicity – single exposure:

May cause respiratory irritation.

Specific target organ toxicity – repeated exposure:

No data available.

Aspiration hazard:

No data available.

Section 12 Ecological Information

Toxicity: potassium bisulfate

Test & Species

96Hr LC50 fish: 3500mg/l

48Hr EC50 Daphnia: 1310mg/l

72Hr EC50 Algae: N/A

Potassium sulfate

Test & Species

96Hr LC50 fish: 680mg/l

48Hr EC50 Daphnia: N/A

72Hr EC5oAlgae:N/A

Persistence and degradability:

No data available.

Bioaccumulative potential:

No data available.

Mobility in soil:

No data available.

Other adverse effects:

No data available.

Section 13 Disposal Considerations

Property of waste:

Hazardous Waste.

Methods of disposal:

Contact a licensed professional waste disposal service to disposal of this material.

Dispose of in accordance with local Environment regulations or local authority Requirement.

Precautions of disposal:

Professional processing together.

Section 14 Transport Information

UN number: 3260

UN proper shipping name: CORROSIVE SOLID, ACIDIC, INORGANIC, N, o. S.

(contains Potassium peroxymonosulfate and Potassium bisulfate)

Transportation primary hazard class: 8

Transportation secondary hazard class: ——

Packing group: II

Section 15 Regulatory Information

Componet

CHINA

TSCA

ENCS

EINECS

Potassium monopersulfate

V

V

V

V

Potassium Sulfate

V

V

V

V

Potassium Bisulfate

V

V

V

V

Magnesium oxide

V

V

V

V

Note 1:

CHINA - China Inventory of Existing Chemical Substances(IECSC)

TSCA - United States Inventory of Toxic Substances Control Act Chemical Substances(TSCA) ENCS - Japan Existing and New Chemical Substances(ENCS)

EINECS - European Inventory of Existing Commercial Chemical Substances(EINECS)

Note 2:

"√" Indicates that the substance included in the regulations "-" That no data or included in the regulations

Section 16 Additional Information

This Safety Data Sheet (SDS) was prepared according to UN GHS (the fifth revised edition), is only for users reference. Users should make their independent judgment of suitability of these information for their particular purposes.

Contact mail: hk8866@hotmail.com/ whatsapp +8618332108399

LEAVE ME A MESSAGE
message
×
Potassium monopersulfate, OXONE,CAROAT, Potassium peroxymonosulfate,삼종염,옥손, monopersulfao potasio,